追蹤
Ceci n'est pas un blog.
關於部落格
我寫我所愛的事物d^__^b
  • 62443

    累積人氣

  • 4

    今日人氣

    1

    追蹤人氣

3ds max 2010安裝後視埠穿透到桌面( 解決辦法如下 )

原文解答 Viewport Transparency (視埠穿透) After starting 3ds Max, the user interface appears but you can see the system desktop through each of the viewports. Typically this problem occurs if you have the display configuration set to either OpenGL or Direct3D, and your graphics card does not completely support OpenGL or Direct3D. 在啟動3ds max之後,用戶界面出現,但你可以通過每個視口看到系統桌面。通常情況下,就會發生這個問題,如果你的顯示配置設置為OpenGL或者Direct3D,和你的顯卡不完全支持OpenGL或Direct3D。(以上是google翻譯,懂意思就好lol) 若用我自己的話就是說,為何開啟max後會有穿透到桌面的情形,是因為顯卡的二個配置OpenGL或者Direct3D不支持3ds max 之後,我打開ATI顯卡控制系統逐一檢視,果然找到Direct3D顯示無法開啟,但我的OpenGL是正常的,所以我只需要找到修復Direct3D的辦法。 首先確認3ds max2010的軟硬體需求,也是一樣,逐一檢視。 Autodesk 3ds Max 2010 System Requirements Autodesk® 3ds Max Design® 2010 software requires one of the following 32-bit or 64-bit operating systems: Microsoft® Windows® XP Professional (Service Pack 2 or higher) Microsoft® Windows® Vista (Business, Premium and Ultimate) Microsoft® Windows® XP Professional x64 Microsoft® Windows® Vista 64 bit (Business, Premium and Ultimate) 3ds Max Design 2010 software requires the following internet browser: Microsoft® Internet Explorer® 6 or higher 3ds Max Design 2010 software requires the following supplemental software: DirectX® 9.0c* (required), OpenGL® (optional) *Some features of 3ds Max Design 2010 are only enabled when used with graphics hardware that supports Shader Model 3.0 (Pixel Shader and Vertex Shader 3.0). Check with your manufacturer to determine if your hardware supports Shader Model 3.0. Hardware Requirements At a minimum, 3ds Max Design 2010 32-bit software requires a system with the following: Intel Pentium® 4 or higher, AMD Athlon® 64 or higher, or AMD Opteron® processor 1 GB RAM (2 GB recommended) 1 GB swap space (2 GB recommended) Direct3D 10, Direct3D 9, or OpenGL-capable graphics card, 128 MB Three-button mouse with mouse driver software 2 GB hard disk space DVD-ROM drive Note: Apple® computers based on Intel processors and running Microsoft operating systems are supported using Apple’s Boot Camp. Click here for the system requirements. Virtual machine environments are currently not supported. At a minimum, 3ds Max Design 2010 64-bit software requires a system with the following: Intel® EM64T, AMD Athlon® 64 or higher, AMD Opteron® processor 1 GB RAM (4 GB recommended) 1 GB swap space (2 GB recommended) Direct3D 10, Direct3D 9, or OpenGL-capable graphics card, 128 MB Three-button mouse with mouse driver software 2 GB hard disk space DVD-ROM drive 資料來自 http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=15458146&linkID=9241177#section8 都確認自己的電腦符合那些"最低"的基本軟硬體需求後,下載DirectX 9.0c(因為我用的系統是XP sp3與3ds max2010相應配合的是DirectX 9.0c) 下載完後,再找ATI的驅動程式,用官網找通常會連結到筆電原廠,我用的是小a,所以連結到的是小a的下載官網,記得選擇右邊的操作系統,篩選之後的VGA那欄就是你要找的程式了! 我是先執行DirectX 9.0c然後重啟電腦後,再安裝ATI解壓縮檔,裏面只要點擊setup程式檔那個就行! 之後就會一直執行下去,但它會有個對話窗說這個程式檔安裝下去可能會造Windows的不穩定之類的話,這部份我是選確認安裝,若真的發生問題的話,請用Windows「系統回覆檔」日期調回你安裝這程式檔以前,但目前來說我的系統狀態是ok的! 再一次的重啟電腦後,開啟3ds max看看是不是已經有格子畫面了??! 祝大家成功!
相簿設定
標籤設定
相簿狀態